| |
AW1 |
AW2 |
AW3 |
| Unit
size mm Width/Length |
350x560 |
350x590 |
350x640 |
| Excl
handle and hitch-height |
310 |
300 |
310 |
| Unit
weight Kg |
30 |
35 |
37 |
| Power
Output NM |
140 |
245 |
320 |
| Unit
speed Mtrs/min (no load) |
12 |
7 |
5 |
| Wheel
size OD std |
250 |
250 |
250 |
| Pulling
power kg 12V |
1500 |
2500 |
3000 |
|
(flat level ground) 24V |
--- |
3000 |
3500 |
The
Australian made motor has the most power output for
its size and is rated for continuous use,a forward and
reversing switch in the handle stops motor instantly
and acts as a brake when rocker switch in handle is
released. The handle is removable for transport and
can be angled each side so that machine can be operated
whilst viewing side of caravan or boat.
Power is from any 12VDC battery or 2X12V giving 24V
usually mounted in van - a battery box can be fitted
on the top of unit (battery not supplied). A battery
lead is supplied with connecting clips. Standard is
3.0m long. It is preferable to keep this as short as
possible to prevent possible voltage drop. For extra
power 24VDC can be used.
When
going over grass, going up a slight slope or a lot of
turning, more power is needed so select the more powerful
unit.
A
new all Australian designed and made soft start is now
available.
Driving wheels can be either single wheel drive for
easier turning or both wheels driving for maximum pulling
power and grip.
Standard wheel is a road tyre suitable for hard surfaces.
Wheels are easy to remove and have split rims making
punctures easy to repair.
With
heavy loads tyres can compress on one side when turning.
This can be overcome with foam filled tyres. This can
be done at the time of ordering or done locally.
Aussie wheels are not a copy of other machines, but
a refined and fully registered design covering both
motor/gearbox and design of a caravan moving device
with Patent Office. We use Australian parts. A three
year warranty is standard.
Aussie wheels are fully C.E. Electromagnetic tested
and approved in accordance with AS1044.
|